Proel HCS20 / Pulse PWM100VHF Clip On Brass / Sax Wireless Microphone System.
The PWM100VHF system is a single channel VHF microphone system. Just plug the receiver into your sound system. Plug the HCS20 mic into the body pack transmitter. Turn it all on and you're ready to go. No channel matching. No messing. The low frequency VHF transmission system is now much less congested than UHF frequency bands and is robust and reliable and can often be transmitted through walls within buildings. No license is required. The system transmits on 174.5Mhz within the license free VHF wireless microphone frequency band.
The compact receiver has LEDs to show RF carrier frequency reception, power LED, a volume control, and offers a choice of jack or XLR output to your sound system. The belt pack transmitter has a microphone input, on/off switch with battery check, and runs of two AA batteries. A transmission level control is provided within the battery compartment to adjust the output level of the mic.
Proel HCS20 Clip On Sax/Brass Mic Specifications:
Element: Back electret condenser.
Polar Pattern: Uni-Directional.
Frequency Response: 50hz - 16khz.
Sensitivity: -45db +/- 3db.
Output Impedance: 250 ohms. +/-30%
Max Input SPL: 130db.
S/N Ratio: >70db
Power Supply: 48V phantom power. Or via compatible wireless systems.
Cable length: 3 metres.
Accessories: 2 x Windshields. Phantom power adaptor.
Supplied in foam lined presentation box with magnetic closing.
Licence Free VHF band.
Carrier Frequency: 174/500Mhz
Battery Life: Up to 8hrs. 2 x AA Alkaline type.
Proel HCS20 Clip On Brass/Woodwind Mic Brochure/Cutsheet.pdf
Please note: The HCS20 microphone is modified for use with the wireless system, so it can no longer be used with phantom power supplies or battery packs for wired operation.